Front Axle question.
Posted: Sat Jul 07, 2012 10:37 pm
Here's a pic of the axle off the tractor.
The knuckle (spindle) moves freely up and down inside the spindle tube about 1/8".
Is this normal?
Can it be tightened by adjusting the steering knuckle arm (Part #21) downward a little?
The knuckle (spindle) moves freely up and down inside the spindle tube about 1/8".
Is this normal?
Can it be tightened by adjusting the steering knuckle arm (Part #21) downward a little?