I just got my first Farmall 140. It still has the 6 volt system and I got the chance to get over my friends who gave it to me to put the new battery in. Turned over but would not fire. So pulled the carb and went to work to overhaul. But with that said my real question is the rear Pto. Since it is located on the left side of the tractor how do you hook up a bush hog or a finishing mower. This little tractor is a god send to my Honey Bee Farm and will work out well if I can understand the equipment needed. It does have the 3 point hook up on the rear so that is okay. Just need some help here on the bush hog and such A front end loader would be nice also if I could find one
Peter
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
got a 140 for my farm nee advice
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Fri Aug 17, 2012 12:41 pm
- Zip Code: 23851
- Super A
- 10+ Years
- Posts: 5232
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: got a 140 for my farm nee advice
The offset PTO doesn't really hurt hooking up to PTO equipment. Even though it is offset it still met ASAE standards. The only issues I have run into are if you have a fast hitch, you have to be mindful of the pto shaft when raising/lowering equipment.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- 10+ Years
- Posts: 1173
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: got a 140 for my farm nee advice
Just to add to what Super A said. Think of a pull type implement such as a baler in a turn. That puts quite a kink in a drive line without any harm. Vern
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: got a 140 for my farm nee advice
If the implement is 3pt mounted, just hook it up. Being off and to the left there is no different than being off vertically. The misalignment is still in one "plane" well within the U-joints' ability to compensate.
If the implement is a trailing type, hitch it offset to the left so it is straight behind the PTO shaft. Otherwise the U-joints will be twisted too far any time you make a right turn.
If the implement is a trailing type, hitch it offset to the left so it is straight behind the PTO shaft. Otherwise the U-joints will be twisted too far any time you make a right turn.
- Super A
- 10+ Years
- Posts: 5232
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: got a 140 for my farm nee advice
Matt Kirsch wrote:
If the implement is a trailing type, hitch it offset to the left so it is straight behind the PTO shaft. Otherwise the U-joints will be twisted too far any time you make a right turn.
Even that doesn't really matter with a standard drawbar as long as you're careful. Really sharp turns it may help but I wouldn't think too much of it. If the tractor has a fast hitch, trailing PTO implements become very, very tricky. When I use the auger wagon behind my Super A with FH, I just disconnect the PTO when I go to move it. I operate it stationary so when I am ready to use it, I hook the PTO up. Had to bend a PTO driveline before I figured it out.....
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- gitractorman
- 10+ Years
- Posts: 2679
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: got a 140 for my farm nee advice
Peter,
Just a thought, not really answering any of your questions though. You said it's 6-volt and you hooked up the battery? Did you hook it up positive to ground? If not, it could be part of your iginition problems, as all 6-volt systems were positive ground, opposite of 12-volt systems which are negative ground. As I said, just a thought. Good luck with the tractor.
Just a thought, not really answering any of your questions though. You said it's 6-volt and you hooked up the battery? Did you hook it up positive to ground? If not, it could be part of your iginition problems, as all 6-volt systems were positive ground, opposite of 12-volt systems which are negative ground. As I said, just a thought. Good luck with the tractor.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
- Contact:
Re: got a 140 for my farm nee advice
GI is right. If you go 12 volt you need to put in a resister and an alternator.
IHC made a quality machine and was leader of the pack.Let's keep them running,
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 17 guests