Hmmm Pump won't fit!

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 2:53 pm

I have the 383013R94 Wooster pump.
I bought it used to replace a worn out 360687R91 pump on my 130.
Started cleaning it up to paint today when I thought I should try to put it on the tractor first to see how it would fit.

It does not fit!!!!

Almost fits. Looks like I would have to use the die grinder to take a bit of meat off the 130 just above it under the dist. Only need about 1/16".

Everything I looked up before buying said it would fit.

What to do????
Just Do It !
User avatar
EZ
10+ Years
10+ Years
 
Posts: 937
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Hmmm Pump won't fit!

Postby Jim Becker » Fri Nov 09, 2012 2:57 pm

The book says it should fit. The problem is probably casting variation on the block. I'd probably apply the die grinder to the block as necessary to make it fit. Since you didn't show a picture, I reserve the right to change my suggestion.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11919
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 3:15 pm

James,
Really just needed some confirmation again that this pump should fit.
I will take a before and after of the cast area and show the pump mounted on the tractor.
It is going to bolt up differently as well, but that all looks easy.

Thanks for the reply.
Ed
Just Do It !
User avatar
EZ
10+ Years
10+ Years
 
Posts: 937
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 4:45 pm

A little shave with the die grinder and the pump fits like a glove.

Image
Image
Image

Thanks for nudge James.
Just Do It !
User avatar
EZ
10+ Years
10+ Years
 
Posts: 937
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest