This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Hmmm Pump won't fit!

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 2:53 pm

I have the 383013R94 Wooster pump.
I bought it used to replace a worn out 360687R91 pump on my 130.
Started cleaning it up to paint today when I thought I should try to put it on the tractor first to see how it would fit.

It does not fit!!!!

Almost fits. Looks like I would have to use the die grinder to take a bit of meat off the 130 just above it under the dist. Only need about 1/16".

Everything I looked up before buying said it would fit.

What to do????
Just Do It !

SPONSOR AD

Sponsor



Sponsor
 

Jim Becker
Team Cub
Team Cub
Posts: 17240
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Hmmm Pump won't fit!

Postby Jim Becker » Fri Nov 09, 2012 2:57 pm

The book says it should fit. The problem is probably casting variation on the block. I'd probably apply the die grinder to the block as necessary to make it fit. Since you didn't show a picture, I reserve the right to change my suggestion.

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 3:15 pm

James,
Really just needed some confirmation again that this pump should fit.
I will take a before and after of the cast area and show the pump mounted on the tractor.
It is going to bolt up differently as well, but that all looks easy.

Thanks for the reply.
Ed
Just Do It !

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: Hmmm Pump won't fit!

Postby EZ » Fri Nov 09, 2012 4:45 pm

A little shave with the die grinder and the pump fits like a glove.

Image
Image
Image

Thanks for nudge James.
Just Do It !


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: workinonit and 5 guests