BOSS, I just rebuilt the steering box on my 140HC and the top bearing was shot, put everything back together and it was a little better but today while cultivating beans it went right back to the same thing, the center pitman arm is riding up and down 1/2 to 3/4 inch, I know this has been covered before. But not after a rebuild I suppose the snap ring could have broken or and this is my question for you the 3 bolt retainer that holds the upper bearing, mine was worn down so I just fliped it upside down, so it was flat on both sides now I am wondering DID IT HAVE A LIP ON THE UPPER SIDE WHEN NEW TO KEEP THE BEARING TIGHT TO THE HOUSING?????????? I am going to have to break it down again anyhow just wondering what parts I need now.
Thanks Rex
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
140 BOSS HOG HELP!!!!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 348
- Joined: Wed Mar 16, 2011 3:31 am
- Zip Code: 21853
- Circle of Safety: Y
-
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 140 BOSS HOG HELP!!!!
Rex, Here is a link to Messick's. You'll need to click on steering and then you can magnify and scroll to look at the parts: http://www.messicks.com/CAS/55885.aspx
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 140 BOSS HOG HELP!!!!
This is the kit I use
http://www.ebay.com/itm/1981225C1-Case- ... 35c9fd0357
I am sure you will need the retainer if it was worn thin, I will look I may have one
Boss
http://www.ebay.com/itm/1981225C1-Case- ... 35c9fd0357
I am sure you will need the retainer if it was worn thin, I will look I may have one
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 140 BOSS HOG HELP!!!!
It shows as still being available
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 348
- Joined: Wed Mar 16, 2011 3:31 am
- Zip Code: 21853
- Circle of Safety: Y
Re: 140 BOSS HOG HELP!!!!
Thanks Fellows,
I am just going to buy the clip and retainer and I will know for sure, I knew that clip was thin when I put it back on but thought I would get lucky, which in a way I guess I did because all the shafts and gears looked great.
I am just going to buy the clip and retainer and I will know for sure, I knew that clip was thin when I put it back on but thought I would get lucky, which in a way I guess I did because all the shafts and gears looked great.
-
- 10+ Years
- Posts: 348
- Joined: Wed Mar 16, 2011 3:31 am
- Zip Code: 21853
- Circle of Safety: Y
Re: 140 BOSS HOG HELP!!!!
I hope I have learned a lesson, while you have it apart and the "C" clip only cost $3.49 its alot cheaper to replace it that having to take it apart again. Sure enough the old "C" clip was broken.
Now good as new.
Now good as new.
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 140 BOSS HOG HELP!!!!
Hope all is well now
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 7 guests