Removing Steering Wheel from 140

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Little Indy
10+ Years
10+ Years
Posts: 286
Joined: Thu Nov 04, 2004 11:50 pm
eBay ID: falco-de-fiume
Location: NE, Cheney

Removing Steering Wheel from 140

Postby Little Indy » Fri Jul 01, 2005 5:47 pm

I purchased Little Red (a 140; my 6 volt cub is Big Red). Little Red needs a new steering wheel. After squirting and soaking the nut with diesel fuel, the nut came off easily. But the wheel itself is stubborn. Any ideas?

Also I have been thinking about moving the flail mower from Big Red to Little Red. Then putting the sickle bar mower on Big Red. Good idea or bad idea. I have done some priliminay measurements and the flail mower should fit.
Si hoc legere scis,nimium eruditionis habes.

10+ Years
10+ Years

Postby WKPoor » Fri Jul 01, 2005 9:20 pm

Soak it with Kroil and you may have to heat the hub of the steering wheel.

User avatar
Cub Pro
Cub Pro
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Zip Code: 00000
Location: Puyallup, WA.

Postby johnbron » Fri Jul 01, 2005 10:25 pm

Split it with a big chisel or hacksaw it off.
Then came Bronson

User avatar
parts man
10+ Years
10+ Years
Posts: 619
Joined: Wed Jul 30, 2003 9:41 pm
Location: Sussex N.B. Can.

Postby parts man » Sun Jul 03, 2005 10:07 pm

Most generally, if you use a heavy punch (drift) and hit it with a 2+ LB hammer from the bottom side, they will come right off (after your arm pretty much falls off). :wink: :lol:
V.P. of T.S.A. (taking stuff apart)

10+ Years
10+ Years

Postby WKPoor » Wed Jul 27, 2005 10:21 pm

Kroil it, heat it, then take an air hammer with a round flat tool in it and start zapping around the flats. The shock of the hammer will break the rust loose. Earl the machinst taught me that air hammer trick.

  • Similar Topics
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest