Oil Change Crankcase

Farmall C, Super C Tractors, 200 & 230 1948-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
ajhbike
Cub Star!!
Cub Star!!
Posts: 418
Joined: Thu Mar 09, 2017 4:06 pm
Zip Code: 06405
Tractors Owned: 1957 Cub- Lorelai
1956 Lo-Boy FH- Rory
1951 Super C FH- Emily
Woods 59 CLF
54A Blade
54-L Blade
72" Rear Blade
Carryalls
Pallet Forks
Location: Branford, CT

Oil Change Crankcase

Postby ajhbike » Mon Nov 13, 2017 7:35 am

Here is an odd thing....I removed the oil and changed the filter. I took care to clean out the groove that the filter gasket sits in and used a Wix 51172. The gasket for the wix is not flat, it has a 2mm side to it and the filter sits on top of it and presumable gets compressed somewhat when the long bolt is tightened. I tightened it down and it seemed to fit okay, but it seems like it should be more of a flat style. Meanwhile I filled up with oil being mindful of the top petcock and filled until it started to drip drop. Buttoned it up and took it for a spin around the neighborhood. It seemed to smoke quite a bit...mostly white but I figured it was because I had treated the previous oil with seafoam a couple of operating hours ago and because I had rinsed with a bit of kerosene. I got back and saw that there was oil leaking out of the driver end spark plug hole and slightly from the top of the long filter bolt.
I opened the top pet cock and it started dripping...and dripping. Apparently because it was cold, it took a while for the oil to level out so I had overfilled it. I let it keep dripping until it stopped....about a half pint or more. I checked out the spark plug and it was only half screwed in! Weird because the engine runs really well and smooth. I took it out and it was really gunked up, cleaned it off well and checked the gap and reinstalled. The long bolt is still leaking slightly and I don't want to over tighten.
Is the Wix the wrong filter? And did I screw anything up by overfilling with oil? The engine still runs smooth but I just want to check with the experts.

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 12766
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Oil Change Crankcase

Postby Don McCombs » Mon Nov 13, 2017 1:09 pm

Your filter and gasket are correct. Did you use a copper sealing washer on the bolt?
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

ajhbike
Cub Star!!
Cub Star!!
Posts: 418
Joined: Thu Mar 09, 2017 4:06 pm
Zip Code: 06405
Tractors Owned: 1957 Cub- Lorelai
1956 Lo-Boy FH- Rory
1951 Super C FH- Emily
Woods 59 CLF
54A Blade
54-L Blade
72" Rear Blade
Carryalls
Pallet Forks
Location: Branford, CT

Re: Oil Change Crankcase

Postby ajhbike » Mon Nov 13, 2017 1:16 pm

I have to say that I didn't notice a washer when I removed it or when I put it back. I will have to check. I would say that there wasn't one before or after going off of memory. Say it isn't there...suggestion as to where to get one?...and why copper?

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 12766
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Oil Change Crankcase

Postby Don McCombs » Mon Nov 13, 2017 2:07 pm

There should be a solid copper sealing washer between the head of the filter bolt and the top of the filter case. Same as the Cub. It is copper, so that it will crush slightly to fill the gap between the bolt and cover. They should be available at your CaseIH dealer.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

ajhbike
Cub Star!!
Cub Star!!
Posts: 418
Joined: Thu Mar 09, 2017 4:06 pm
Zip Code: 06405
Tractors Owned: 1957 Cub- Lorelai
1956 Lo-Boy FH- Rory
1951 Super C FH- Emily
Woods 59 CLF
54A Blade
54-L Blade
72" Rear Blade
Carryalls
Pallet Forks
Location: Branford, CT

Re: Oil Change Crankcase

Postby ajhbike » Mon Nov 13, 2017 2:29 pm

Do you happen to know the size of the washer? We don't have case/ih dealers here.

ajhbike
Cub Star!!
Cub Star!!
Posts: 418
Joined: Thu Mar 09, 2017 4:06 pm
Zip Code: 06405
Tractors Owned: 1957 Cub- Lorelai
1956 Lo-Boy FH- Rory
1951 Super C FH- Emily
Woods 59 CLF
54A Blade
54-L Blade
72" Rear Blade
Carryalls
Pallet Forks
Location: Branford, CT

Re: Oil Change Crankcase

Postby ajhbike » Mon Nov 13, 2017 3:46 pm

Found a thread
1/2" ID
7/8" OD
1/16" Thick
From NAPA

User avatar
Denny Clayton
10+ Years
10+ Years
Posts: 4236
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: Oil Change Crankcase

Postby Denny Clayton » Thu Nov 16, 2017 8:36 pm

You can also use a nylon 1/2” washer.
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'48 Cub
C-3 mower, FH Woods 42F, 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Image
Circle of Safety


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 0 guests