super c touch control

Farmall C & Super C Tractors, 1948-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

super c touch control

Postby dw » Wed Apr 05, 2006 9:45 pm

How hard is it too plumb in 2 hydralic hoses in to the touch control? I have seen pictures of this done on c models, but cannot make out the actual details. Whitch line is the supply and whitch is the return to tank?
dw
5+ Years
5+ Years
 
Posts: 38
Joined: Fri Dec 09, 2005 11:43 pm

Postby WKPoor » Thu Apr 06, 2006 6:51 pm

I believe its done with the same aux. block used on the Cub touch control but I have not actually done it myself.
WKPoor
5+ Years
5+ Years
 

Postby jostev » Thu Apr 06, 2006 7:33 pm

Well, if you have a Fast hitch, it will be much easier I think, my C has the same valve setup with a loader that our Super C has with the fast hitch, if I get a chance tomorrow, I will take some pics and find out....

Johnny
User avatar
jostev
Cub Pro
Cub Pro
 
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Location: NH, Bethlehem
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450

Postby LiL' Red » Thu Apr 06, 2006 10:36 pm

The smaller line of the two is pressure, the larger is return to pump. You could run from the existing plugs in the manifold block that attaches to the lift unit, but if you are after volume you will neeed to install a block or find a used remote valve for C SuperC 200.
LiL' Red
5+ Years
5+ Years
 
Posts: 915
Joined: Sat Jun 18, 2005 9:41 pm
Location: IL, Galesburg
Zip Code: 61401
eBay ID: woodpecker56


Return to Farmall C & Super C

Who is online

Users browsing this forum: No registered users and 2 guests