Farmall C & Super C Tractors, 1948-1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Thu Aug 09, 2007 12:03 pm
Is there an inexpensive type gauge that can be used for the touch control fluid inplace of the original??
Fri Aug 10, 2007 9:35 am
I think the short answer is no. However, on our 100 we replaced the gauge and it hardly ever moves. Unless you are using a hydro-creeper I can't see as it is really needed. You should hear the pump laboring if the hydraulics bind up. Many tractors have run for years with that gauge rusted out. In fact, I have never see on working, except on a restoration.
Fri Aug 10, 2007 11:20 am
Try a well stocked hardware or farm supply store. Look in the hydraulics and the plumbing sections.
Valu-bilt catalog has two hydraulic pressure gauges listed. 0 -5000 psi. Prices are $11.39 and $16.99
You might also try your local industrial supply store.
Fri Aug 10, 2007 11:37 am
eugene, he is looking for a temperature gauge, rather than pressure.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.