Page 1 of 1
Best way to flush radiator
Posted: Sun Sep 23, 2007 5:34 pm
by jostev
I was just wondering what you guys think is the best way to flush a radiator? This winter in my C, i drained the "fluid" and got a bunch of rusty/orange gross looking stuff, so i put in some water, then drained that and repeated that a few times, one i filled it up with water, and run it for a min or two, then i drained it back out, and put fresh fluid back in, and now it's really crappy looking again... I was just wonderin what the BEST way to clean it out real good, and that's semi quick... i guess i coiuld just take the radiator off and clean it the long way
Thanks for any suggestions
Johnny
Posted: Sun Sep 23, 2007 7:44 pm
by beaconlight
Just take the lower hose off and use some sort of reduced nozzle. Any of the chemicals for that purpose will probably damage an old rad like a cub.
Posted: Sun Sep 23, 2007 7:54 pm
by Eugene
A lot of the crap is probably coming out of the block. My thought is to remove the upper and lower radiator hoses then back flush the block and radiator.
The operators manual for the B suggests washing soda as the cleaning agent.
Posted: Sun Sep 23, 2007 8:00 pm
by Don McCombs
I'd use the procedure in the older Cub Operators Manual. You'll have to adjust the proportions to fit your C's cooling system capacity. Here's the link:
http://tinyurl.com/ywcs8d
Posted: Mon Sep 24, 2007 3:44 pm
by jostev
Thanks guys, I guess i'll take the rad hoses off, flush the rad/block a few times, then see ifn I can find that much washing soda
Thanks again
Johnny
Posted: Wed Oct 10, 2007 7:51 am
by schmibm
Washing soda not Baking soda. There is a huge difference. Make sure you know what you are buying.
Posted: Wed Oct 10, 2007 8:01 am
by Bigdog
Johnny - the washing soda you are looking for is the same stuff used in the electrolysis tanks. Arm & Hammer Washing Soda - found in the detergent aisle of the super market or Donny's favorite place - Wal Mart.
Posted: Wed Oct 10, 2007 8:57 am
by Don McCombs
Posted: Wed Oct 10, 2007 4:39 pm
by jostev
sorry, that's what i meant, but not what i said
Johnny
Posted: Thu Oct 11, 2007 9:30 pm
by Max_Wedge
Don McCombs wrote:I'd use the procedure in the older Cub Operators Manual. You'll have to adjust the proportions to fit your C's cooling system capacity. Here's the link:
http://tinyurl.com/ywcs8d
Don, that link doesn't work for me. Can you post the procedure or give me a different link?
Max
Posted: Thu Oct 11, 2007 9:37 pm
by Bigdog