The book just says to access through the hole in the bottom of the housing but no details.Timing a C
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
3 posts
• Page 1 of 1
Timing a C
by LiL' Red » Mon Apr 21, 2008 10:31 pm
Trying to time my C, found the TDC mark on the flywheel but no pointer or reference mark. How do you reference the TDC line The book just says to access through the hole in the bottom of the housing but no details.
The book just says to access through the hole in the bottom of the housing but no details.- LiL' Red
- 501 Club
- Posts: 915
- Joined: Sat Jun 18, 2005 9:41 pm
- Location: IL, Galesburg
- Zip Code: 61401
- eBay ID: woodpecker56
Re: Timing a C
by Jim Becker » Mon Apr 21, 2008 11:29 pm
The pointer is a rib cast into the bottom cover on the front side of the flywheel.
-
Jim Becker - Team Cub
- Posts: 11851
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX/MN
- Zip Code: 75048
- Circle of Safety: Y
Re: Timing a C
by schmibm » Mon Apr 28, 2008 5:42 pm
Bottom dead center is the mark.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
20 other Farmalls A thru SMTA.
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
20 other Farmalls A thru SMTA.
-
schmibm - 501 Club
- Posts: 582
- Joined: Tue Jun 06, 2006 10:37 pm
- Location: Janesville, IA
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|