Farmall C & Super C Tractors, 1948-1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Aug 22, 2008 10:21 pm
My Super C is leaking hydraulic fluid like crazy - info on probable cause? How major a repair?? Easier to do a major rebuild and solve all potential problems?? No experience in this area!! Dusty
Sat Aug 23, 2008 9:54 am
Need more info to help.Where is it leaking???Pump lines or control?? Kevin
Sat Aug 23, 2008 10:21 am
A lot depends on where the leak is coming from, but assuming it is from the internal pistons, a tear down is necessary to replace the O rings (assuming there is not a worse problem). At that point I would suggest a complete overhaul and clean out. The service manual on Rudi's websitehttp://www.cleancomputes.com/Cub/Blue%20Ribbon%20Service%20Manuals/GSS-1024%20Touch%20Control/index.html
covers the Super C hydraulics as well as the cub, and the kit is available form your local Ih dealer as well as several places on line, including http://www.CNGCO.com
Mon Aug 25, 2008 6:43 am
Thanks - I did download the manual - w/do a closer inspection and go from there. It's low on my project priority list right now! Will probably need more advice when I tear into it.!! Dusty
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.