Page 1 of 1
Super C leaking Hydraulic
Posted: Fri Aug 22, 2008 10:21 pm
by Dusty B
My Super C is leaking hydraulic fluid like crazy - info on probable cause? How major a repair?? Easier to do a major rebuild and solve all potential problems?? No experience in this area!! Dusty
Re: Super C leaking Hydraulic
Posted: Sat Aug 23, 2008 9:54 am
by KETCHAM
Need more info to help.Where is it leaking???Pump lines or control?? Kevin
Re: Super C leaking Hydraulic
Posted: Sat Aug 23, 2008 10:21 am
by John *.?-!.* cub owner
A lot depends on where the leak is coming from, but assuming it is from the internal pistons, a tear down is necessary to replace the O rings (assuming there is not a worse problem). At that point I would suggest a complete overhaul and clean out. The service manual on Rudi's website
http://www.cleancomputes.com/Cub/Blue%20Ribbon%20Service%20Manuals/GSS-1024%20Touch%20Control/index.html covers the Super C hydraulics as well as the cub, and the kit is available form your local Ih dealer as well as several places on line, including
http://www.CNGCO.com
Re: Super C leaking Hydraulic
Posted: Mon Aug 25, 2008 6:43 am
by Dusty B
Thanks - I did download the manual - w/do a closer inspection and go from there. It's low on my project priority list right now! Will probably need more advice when I tear into it.!! Dusty