Switch to full style
Farmall C & Super C Tractors, 1948-1954

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

SC touch control

Sun Jun 07, 2009 9:59 pm

Is there any special trick getting the hydraulics to work on a Super C? I pull/push the levers and nothing! It was working before I brought it home. I haven't tried it till today

Re: SC touch control

Mon Jun 08, 2009 7:51 am

nope, other than the engine has to be running. :D Might want to check the fluid level, they have the same problem with the seal/o ring leaking into the engine as a cub has. The touch control manual in the Blue Ribbon section of Rudi's server covers Super A and C, as well as cub.

Re: SC touch control

Mon Jun 08, 2009 8:12 am

Thanks.
Yes, I had engine running and I just added fluid, but I mowed all day, so I will check to see if it leaked out.
Post a reply