I see new cylinders come in tie-rod and welded versions. Some are rated 2,000 psi, some 2,500 psi and some 3,000 psi.
Any suggestions - especially concerning the psi rating???? Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super C Hydraulic Cylinder
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
VinceD
- 10+ Years
- Posts: 4587
- Joined: Mon Apr 17, 2006 9:17 pm
- Zip Code: 65626
- Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155 - Circle of Safety: Y
- Location: MO, Bakersfield, (South - Central)
Super C Hydraulic Cylinder
I have to replace the cylinder on the back of my SC. It leaks around the bottom of the cylinder and attempts by several shops to stop the leak have been unsuccessful. I'm tired of living with an aluminum turkey baking ban below the cylinder.
I see new cylinders come in tie-rod and welded versions. Some are rated 2,000 psi, some 2,500 psi and some 3,000 psi.
Any suggestions - especially concerning the psi rating???? Thanks.
I see new cylinders come in tie-rod and welded versions. Some are rated 2,000 psi, some 2,500 psi and some 3,000 psi.
Any suggestions - especially concerning the psi rating???? Thanks.
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
High atop Hummingbird Hill
In the Missouri Ozarks
-
Don McCombs
- Team Cub Mentor
- Posts: 17473
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Super C Hydraulic Cylinder
I see lots of them on eBay. Used, that is.
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 4 guests
