This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
need C72 blade info
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
need C72 blade info
Does anyone have any detailed pictures showing the mounting brackets for the non fast hitch rear mounts for this blade? I have a super C and would like to set it up for the grader position.
Pete from Virginia Beach
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: need C72 blade info
Ok I found this on RPM when I googeled. Looked in the archives on FC.C but found no answers, just the same requests that I had. So now this should come up when others search our site. It shows fast hitch and non fast hitch.
Pete from Virginia Beach
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: need C72 blade info
Here are the dementions for the rear non fast hitch bracket that is no longer availible.
If you refer to illustration 6-- the holes marked with #1 are 26'' center to center.This should be the same as the outer holes on your u shaped piece of the rear frame. The frame will just touch the bottom of the drawbar without putting any pressure on it. From the center of bolt E to the rear edge of the frame is 8 3/4''. From bolt D to the hole in the rear frame (#1) is 20 1/2'' center to center. These measurements are hard to do because of the bends in the brackets.
If you refer to illustration 6-- the holes marked with #1 are 26'' center to center.This should be the same as the outer holes on your u shaped piece of the rear frame. The frame will just touch the bottom of the drawbar without putting any pressure on it. From the center of bolt E to the rear edge of the frame is 8 3/4''. From bolt D to the hole in the rear frame (#1) is 20 1/2'' center to center. These measurements are hard to do because of the bends in the brackets.
Pete from Virginia Beach
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 6 guests