Hello and good afternoon,
I have a Farmall 200 and I wanted to drop the hydraulic fluid but while I am in there I wanted to replace the gauge as well. So if anyone has a gauge or knows where I can get a stock or stock looking gauge I would appreciate it. But in order to replace it I have to take the fitting out from the reservoir. I was curious what size. I am assuming it is NPT. Any comments or suggestions would be appreciated. Thank you
Lee
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall 200 Hytrann Fluid Gauge Fitting Size
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 23
- Joined: Tue Aug 25, 2015 7:40 am
- Zip Code: 55328
-
- 5+ Years
- Posts: 78
- Joined: Mon Jun 22, 2015 3:12 am
- Zip Code: 76633
Re: Farmall 200 Hytrann Fluid Gauge Fitting Size
The temperature "bulb" is likely very similar to any automotive mechanical temp gauge.
These are the only two I have found:
http://www.ebay.com/itm/Touch-Control-T ... 1404216947
http://www.ebay.com/itm/Touch-Control-T ... 1013308840
These are the only two I have found:
http://www.ebay.com/itm/Touch-Control-T ... 1404216947
http://www.ebay.com/itm/Touch-Control-T ... 1013308840
-
- 5+ Years
- Posts: 23
- Joined: Tue Aug 25, 2015 7:40 am
- Zip Code: 55328
Re: Farmall 200 Hytrann Fluid Gauge Fitting Size
Thank you very much. I like it and it looks authentic too. It says it'll fit a 200 so I could assume the thread will be the same. I appreciate the response.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 3 guests