This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

more farmall c issues

Farmall C, Super C Tractors, 200 & 230 1948-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Tiller1940
5+ Years
5+ Years
Posts: 53
Joined: Tue Aug 25, 2015 2:48 pm
Zip Code: 66042
Tractors Owned: 1937 Farmall F-12
1938 Farmall F-20
1940 Farmall B
1940 Farmall A
1950 Farmall C
1952 Farmall Cub

more farmall c issues

Postby Tiller1940 » Sat Jan 02, 2016 9:28 pm

Alright guys hopefully the last post on my C but, I rebuilt the governor with all new parts from Messick's and put it on the tractor wont idle down like its suppose to and I didn't adjust anything and now it races when the throttle is set at an idle, I recently converted it to 12volt and it started giving me issues after I did so. Could the new 12volt coil not be functioning right or would it be a carb issue? Thanks. p.s. I was having issues with it idling down before I rebuilt the governor.
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
havoc1482
10+ Years
10+ Years
Posts: 987
Joined: Fri Sep 20, 2013 11:17 am
Zip Code: 01085
eBay ID: havoc1482
Tractors Owned: _______ 1948 Farmall Super A
Circle of Safety: Y
Twitter ID: @havoc1482
Location: Westfield, MA
Contact:
Contact havoc1482

Re: more farmall c issues

Postby havoc1482 » Sun Jan 03, 2016 12:42 pm

check to make sure the linkages between the governor rockshaft and the carburetor throttle butterfly valve are properly adjusted. It could be adjusted too far open. Check the throttle linkage too.
Mike
Image

I bleed Black & Gold

IH Collectors Club New England (Chapter 18)

Western Mass. (The 413)
Top
Tiller1940
5+ Years
5+ Years
Posts: 53
Joined: Tue Aug 25, 2015 2:48 pm
Zip Code: 66042
Tractors Owned: 1937 Farmall F-12
1938 Farmall F-20
1940 Farmall B
1940 Farmall A
1950 Farmall C
1952 Farmall Cub

Re: more farmall c issues

Postby Tiller1940 » Mon Jan 04, 2016 8:28 am

Thanks havoc1482 for the help the rod from the governor to carb needed adjusting as well as the carb was sticking at full throttle.
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: more farmall c issues

Postby John *.?-!.* cub owner » Mon Jan 04, 2016 2:28 pm

The sticking at full throttle is sometimes caused by the carb mounting gasket protruding into the throat a little and causing it to bind.
If you are not part of the solution,
you are part of the problem!!!
Top
Tiller1940
5+ Years
5+ Years
Posts: 53
Joined: Tue Aug 25, 2015 2:48 pm
Zip Code: 66042
Tractors Owned: 1937 Farmall F-12
1938 Farmall F-20
1940 Farmall B
1940 Farmall A
1950 Farmall C
1952 Farmall Cub

Re: more farmall c issues

Postby Tiller1940 » Fri Jan 08, 2016 9:48 am

Thanks for the help the shaft from the governor to the carb was binging up a little and also the gasket was causing it to.
Top
Post Reply

Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 8 guests