Auxiliary touch control valve

[BlueBoy1964]

Hello everybody,
Does anyone have a diagram of the
auxiliary touch control valve that fits on
a Farmall Super C with a two point hitch
and do you know what parts I would need
to rebuild it. Thanks BlueBoy.

[Matt Kirsch]

If you go on to partstore.caseih.com and look up under the Super C, I believe the valve is in the optional equipment category.

There isn't much to the valve, just a couple of o-rings as I recall.

[AL Farmall Boy]

It only has 1 oil seal at the top where the valve comes through. Get a new boot too from all states ag parts on ebay. There are 2 orings that go on the manifold/Hyd. Lines when you reinstall them.

I'm actually having trouble with the seal fitting tight enough in the bore.

[AL Farmall Boy]

Did you get yours rebuilt Blueboy?