Switch to full style
Farmall C & Super C Tractors, 1948-1954

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Super C, need wide front end info

Fri Sep 09, 2005 1:07 am

Hi,

My dad has a Super C with a tricycle front end and wants to change it out to a wide front end. I'm sure this topic has been covered before but I'm new to this forum and don't know how to find it. I'd appreciate any links to info about the changeover. We have seen the Progressive Farmer article on a Super C restoration but need much more than that to know what to buy or do to make this happen. Any advice or info will be appreciated. Thanks.

Wayne

Fri Sep 09, 2005 6:25 am

There was one on e-bay a few days ago.
Best,
Mike

Fri Sep 09, 2005 10:06 am

It's a pretty straightforward conversion... Jack up the tractor, unbolt the old front end, bolt the new one on. If you're able to differentiate between a wrench and a rutabega

The hardest part will be finding one in decent condition for a reasonable price.

Fri Sep 09, 2005 6:02 pm

Go to steelwheelranch.com - get phone # and ask for Mike. He'll probably have it and at the most reasonable price you'll find.

Steel Wheel ranch

Mon Sep 12, 2005 4:08 am

Thanks for the advice. I called Steel Wheel ranch and they don't have one. In fact he said a wide front end would be hard to come by, which I've found to be true.

Mon Sep 12, 2005 8:33 am

I've gotta say that I've NEVER seen a factory wide front for a "C" series tractor? :shock: I would think that they'd be RARE and hard to find too :wink:

Mon Sep 12, 2005 9:03 am

Country,

Here's one that may be kinda rare... but maybe the owner would be willing to part it out?

Image

Mon Sep 12, 2005 12:49 pm

Hey George...YES, That sure is a BEAUTY! 8) I love all the 1950 display dress ups on her! :D He sure went to a GREAT DEAL of work to make her Showroom Fresh! :wink:

Mon Oct 10, 2005 11:48 am

I'll add my stupid question, will the wide front from an A work on a C? It seems the pivot point is centally mounted on both.

Mon Oct 10, 2005 6:34 pm

dhermesc wrote:will the wide front from an A work on a C?


No, not even close.
Post a reply