Anyone parting out a Farmall 460?

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
dock09
10+ Years
10+ Years
Posts: 8
Joined: Tue Dec 06, 2005 7:18 pm

Anyone parting out a Farmall 460?

Postby dock09 » Wed Dec 07, 2005 9:15 pm

On transporting my 1961 460 from Wisconsin to TN, I lost a piece of sheetmetal - the left side over the battery area. Anyone know where I can get a replacement? ALso I want to convert to a 3-pt hitch. It is about 27 in between the fast hitch draw arms. So should I order the inserts and call it 26 when choosing which inserts to buy (the other option is 32)? Any advice from anyone? Thanks - Dock

Paul_NJ
10+ Years
10+ Years
501 Club
501 Club
Posts: 565
Joined: Mon Apr 07, 2003 11:35 am
Location: Morristown, New Jersey

Postby Paul_NJ » Thu Dec 08, 2005 6:18 pm

I ran into a guy on YTMAG.com who appears to specialize in sheet metal parts for 240-340-460-560 Farmalls named Jeff Foreman. Here is a link to one of his posts - perhaps you can reply from that post directly to him.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=farmall&th=484151

I assume you're looking a trim piece - be prepared to pay $60 per piece - that's what I found on my 340.

Might also try JP Tractor.

Good Luck
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/

dock09
10+ Years
10+ Years
Posts: 8
Joined: Tue Dec 06, 2005 7:18 pm

Farmall 460

Postby dock09 » Thu Dec 08, 2005 9:46 pm

Unfortunately I have a Farmall 460 - not a Utility - so the parts are not interchangeable. Thanks for the try though. I am emailing all the salvage tractor sites on the internet so maybe one of them wll have the items.

Paul_NJ
10+ Years
10+ Years
501 Club
501 Club
Posts: 565
Joined: Mon Apr 07, 2003 11:35 am
Location: Morristown, New Jersey

Postby Paul_NJ » Thu Dec 08, 2005 11:55 pm

Don't just go on what that post said about Farmall vs IH Utilities. If you haven't already, contact Jeff. He supplied my buddy with sheet metal parts for his Farmall 560.
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/

Ida Red
10+ Years
10+ Years
501 Club
501 Club
Posts: 571
Joined: Wed Apr 20, 2005 6:41 am
Location: Norwich,Ontario

Farmall 460

Postby Ida Red » Sat Feb 04, 2006 10:52 pm

Are the rear tires and rims from a 460 fit on a 400 and are they wider? Red
IHC made a quality machine and was leader of the pack.Let's keep them running,


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests