Need help on identifying this tractor

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Mon Jul 05, 2021 8:37 pm

Jim,

The loader is attached to front frame..not the axle..and casting number on block is 3 055 003 R3..I also attached photo below

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Mon Jul 05, 2021 8:39 pm

20210625_200050.jpg

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Mon Jul 05, 2021 8:44 pm

If someone have a similar tractor, please help to share the information of model number...it need a lot work on it but before I start I need to confirm the model number.

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 15627
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Need help on identifying this tractor

Postby Don McCombs » Mon Jul 05, 2021 9:36 pm

Definitely no 1 there.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39
Circle of Safety

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Mon Jul 05, 2021 9:51 pm

Don.,
Yes..there no "1"...but what is your guess..if there was a "1"

tst
10+ Years
10+ Years
Posts: 4392
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby tst » Mon Jul 05, 2021 10:01 pm

that is the casting # for the block, keep looking for a serial # probably stamped in the block

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Mon Jul 05, 2021 10:55 pm

Thanks Tst..I will look for tomorrow..

Jim Becker
Team Cub
Team Cub
Posts: 15910
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need help on identifying this tractor

Postby Jim Becker » Mon Jul 05, 2021 11:04 pm

The block part number doesn't help much. I think it means it is a D-239 engine. That should be cast in somewhere, maybe the hidden numbers just below the part number. Diesel? 4 cylinder? How many speeds in the main transmission? Hi-Lo? Reverser? Torque converter?

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 12:15 am

Jim,
I will look again tomorrow for engine model number..
It is a diesel, 4 cycles, I think..8 speed with Hi-Lo..and one Revere...(not sure on transmission since previous owner do not know anything about the tractor..)

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 15627
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Need help on identifying this tractor

Postby Don McCombs » Tue Jul 06, 2021 6:13 am

jc-ih wrote:Don.,
Yes..there no "1"...but what is your guess..if there was a "1"

The 2544 serial numbers started at 10250, so it can't be that model.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39
Circle of Safety

User avatar
indy61
10+ Years
10+ Years
Posts: 1222
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby indy61 » Tue Jul 06, 2021 7:31 am


User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 15627
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Need help on identifying this tractor

Postby Don McCombs » Tue Jul 06, 2021 7:56 am

That looks like a winner!
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39
Circle of Safety

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 5565
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub "Bernie" with Fast Hitch
'55 Cub "Bruno" with Woods 59 mower
'55 Cub "Bertha" with Woods 42 mower
'55 Cub "Ben" with Woods 42 mower
'56 Cub "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Need help on identifying this tractor

Postby Dale Finch » Tue Jul 06, 2021 8:50 am

So what's his prize??!! :lol:
Dale Finch
Image
Circle of Safety

Jim Becker
Team Cub
Team Cub
Posts: 15910
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need help on identifying this tractor

Postby Jim Becker » Tue Jul 06, 2021 9:46 am

3514 is getting into the right series/age tractor. However, my reference shows the 3514 with a D-188 engine, not a D-239.

User avatar
indy61
10+ Years
10+ Years
Posts: 1222
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby indy61 » Tue Jul 06, 2021 10:01 am

TractorData.com shows the D-188 engine was used on early 3514's and the D-239 was used beginning with tractor serial number 1695. I don't know if that is correct or not.

https://www.tractordata.com/industrial- ... ngine.html


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 1 guest