Need help on identifying this tractor

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 10:28 am

I think..Indy61 maybe right the photos from link looks very similar...I will look for the engine model number today to see if it matches up with model number. THANKS SO MUCH!

Jim Becker
Team Cub
Team Cub
Posts: 15916
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need help on identifying this tractor

Postby Jim Becker » Tue Jul 06, 2021 10:33 am

indy61 wrote:TractorData.com shows the D-188 engine was used on early 3514's and the D-239 was used beginning with tractor serial number 1695. . . .

That could be. My reference on the 3514 could be older than the change. The parts catalog for the D-239 does not list any 514/3514 in the applications. But those lists aren't always up to date either.

Except for the 4 digit serial number, a 2544 seems a pretty good match. (Sometimes, an upgrade to a model is a half-step towards the replacement model.)

The "W" after the serial number probably indicates it has a forward-reverse transmission.

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 10:57 am

20210706_083622.jpg


The other stamp number on block is 1226 P..Is that the serial number.. ...
20210706_083622.jpg
Is there a specific location to look for the engine model

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 15637
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Need help on identifying this tractor

Postby Don McCombs » Tue Jul 06, 2021 11:12 am

12 26 P is a casting code. It means the engine block was cast on December 26, 1969.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39
Circle of Safety

tst
10+ Years
10+ Years
Posts: 4396
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby tst » Tue Jul 06, 2021 12:31 pm

you are looking for a number stamped into the block, on a smooth surface, maybe 1/2" tall, probably rusted over so you cannot see it easily, all the "raised" #s are from casting

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 2:15 pm

Thanks guys..I will try again...

User avatar
indy61
10+ Years
10+ Years
Posts: 1223
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby indy61 » Tue Jul 06, 2021 2:28 pm

The casting part number you gave (3 055 003 R3) indicates a D-239 engine. The date code indicates Dec. 1969.
I would say you have a 1970 International Harvester 3514.

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 3:08 pm

Thanks everyone for all your input...

Jim Becker
Team Cub
Team Cub
Posts: 15916
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need help on identifying this tractor

Postby Jim Becker » Tue Jul 06, 2021 3:21 pm

With all the specifics that have been gathered, everything points to it being a 3514, built in 1970. Finding the engine number probably isn't critical at this point. If you want to look any more, I believe it should be on the right side.

User avatar
indy61
10+ Years
10+ Years
Posts: 1223
Joined: Fri Jan 25, 2008 9:02 am
Zip Code: 00000
Circle of Safety: Y

Re: Need help on identifying this tractor

Postby indy61 » Tue Jul 06, 2021 4:51 pm

Here is a brochure for the 3514 on ebay that mentions the D-239 engine.

https://www.ebay.com/itm/233293655017

Jim Becker
Team Cub
Team Cub
Posts: 15916
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need help on identifying this tractor

Postby Jim Becker » Tue Jul 06, 2021 7:12 pm

That brochure has a year code "Y", which is 1970.

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Tue Jul 06, 2021 8:47 pm

Yes..I will get the repair manual of 3514..Hopefully it is the right..

jc-ih
Posts: 28
Joined: Sat Jul 03, 2021 9:19 pm
Zip Code: 92570

Re: Need help on identifying this tractor

Postby jc-ih » Fri Jul 09, 2021 10:49 pm

Thanks guys..I got my manuals today and confirm that the tractor is IH 3514..Thanks again....I have a few questions but I will start a different post.


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests