3514 industrial loader backhoe
Posted: Wed Nov 08, 2006 9:35 am
The Zagray Farm Museum has acquired this loader, but of course there's a couple of glitches.
we are in need of a service manual for that unit. looked on Binder Books, but $250 hurts a bit. probably will end up there, but if someone has one we could sure use it.
two problems...one a hydraulic leak around the backhoe swing pin. as the bottom pin wears, it look like it must cause problems for a hydraulic line / fitting in the top for the swing oil return line, i'm assuming. would be nice to know how it comes apart.
the second problem... won't move next thing to look at there is the dump valve set-up. after that?
we are in need of a service manual for that unit. looked on Binder Books, but $250 hurts a bit. probably will end up there, but if someone has one we could sure use it.
two problems...one a hydraulic leak around the backhoe swing pin. as the bottom pin wears, it look like it must cause problems for a hydraulic line / fitting in the top for the swing oil return line, i'm assuming. would be nice to know how it comes apart.
the second problem... won't move next thing to look at there is the dump valve set-up. after that?