Fri Feb 22, 2008 12:10 am
I need to ask someone who knows what this would be worth. Is this worth 500.00 It sounded a lil high to me, but it might not be as I have no Idea.
Fri Feb 22, 2008 5:56 am
What does it go on? I think its right in the price range of what hitches go for.
Fri Feb 22, 2008 6:28 am
M, 400, 450 probably? From what I've seen, that's not really out of line for one that big depending on condition.
But I always try to pay at least a little below asking price...
Fri Feb 22, 2008 9:31 am
I'm sorry, I guess that would help. It goes on a Farmall H
Fri Feb 22, 2008 9:53 am
That's a decent price. I sold a single cylinder 3 point a while back for $300. It was a home-made unit but was very heavily built and was set up for either an M or H. It must have been copied from the unit in the picture as it looked just like it except for the single cylinder.
Fri Feb 22, 2008 1:43 pm
I gave $300. for a used ABBOTT BROS.,--Blytheville, ark. made one --for the smd, and that was 30 years ago,--no cylinders, but extremely heave made!---So $500 for the one in the pic would be about right in my opinion! It's a good lookin' hitch! thanks; sonny
Fri Feb 22, 2008 1:54 pm
Fri Feb 22, 2008 7:03 pm
I just ordered a new one for a customer here in NB, and when it lands here with the cylinders he'll have right in the ballpark of $1500 into it!
More than I would put into one, that's for certain!
Sat Feb 23, 2008 10:57 am
Yep, a brand new set up will take about $1,000 out of your pocket real fast, and then you still need cylinders.
Mon Feb 25, 2008 6:12 pm
The one I bought a few yrs back was IMO the finest made one on the market. Its is a Saginaw 2 cylinder. Extremely heavy built. Price with shipping $750.00. Just go to http://www.saginawcountytractor.com/
. He has pics there too. Unit weighs in somewhere near 400+lbs.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.