Farmall Cub

I need to ask someone who knows what this would be worth. Is this worth 500.00 It sounded a lil high to me, but it might not be as I have no Idea.

What does it go on? I think its right in the price range of what hitches go for.

M, 400, 450 probably? From what I've seen, that's not really out of line for one that big depending on condition.

But I always try to pay at least a little below asking price...

I'm sorry, I guess that would help. It goes on a Farmall H

That's a decent price. I sold a single cylinder 3 point a while back for $300. It was a home-made unit but was very heavily built and was set up for either an M or H. It must have been copied from the unit in the picture as it looked just like it except for the single cylinder.

I gave $300. for a used ABBOTT BROS.,--Blytheville, ark. made one --for the smd, and that was 30 years ago,--no cylinders, but extremely heave made!---So $500 for the one in the pic would be about right in my opinion! It's a good lookin' hitch! thanks; sonny

Thanks, Sonny!

I just ordered a new one for a customer here in NB, and when it lands here with the cylinders he'll have right in the ballpark of $1500 into it! More than I would put into one, that's for certain!

Yep, a brand new set up will take about $1,000 out of your pocket real fast, and then you still need cylinders.

The one I bought a few yrs back was IMO the finest made one on the market. Its is a Saginaw 2 cylinder. Extremely heavy built. Price with shipping $750.00. Just go to http://www.saginawcountytractor.com/. He has pics there too. Unit weighs in somewhere near 400+lbs.