Tractor cab edge molding source?

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Paul_NJ
10+ Years
10+ Years
501 Club
501 Club
Posts: 565
Joined: Mon Apr 07, 2003 11:35 am
Location: Morristown, New Jersey

Tractor cab edge molding source?

Postby Paul_NJ » Tue Mar 25, 2008 8:41 am

I'm restoring a 240 Utility that has a Sims cab. Where the (vertical) front of the cab meets the tractor's (horizontal) hood there is a length of rubber edge molding separating them, and it needs to be replaced. It looks like a 1/2 inch diameter thick walled tube that is slit along it's length, that fits snugly onto the vertical cab bracket. It's very visible so I'd like to find a manufactured piece. Does anyone have any suggestions of where I could buy something like that? McMaster-Carr has an extensive selection of edge moldings they sell by the foot, but unfortunately nothing similar. Thanks.
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12153
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Tue Mar 25, 2008 9:23 am

Don't know if they have what you want, but I'd start here:
http://www.steelerubber.com
Go to their on-line catalog then look at "Street Rod Extrusions".

Here is another (never saw their products):
http://www.metrommp.com/
Go to "Universal Parts" then look at "U-Channels".

If you have someone locally that does street rod work, they can probably help you out.

Paul_NJ
10+ Years
10+ Years
501 Club
501 Club
Posts: 565
Joined: Mon Apr 07, 2003 11:35 am
Location: Morristown, New Jersey

Postby Paul_NJ » Tue Mar 25, 2008 9:59 pm

Thanks Jim

I'll give them a call.

Paul
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests