Do the regular A/super A/140 mid and rear cultivators work on the HC model or are special cultivators/universal mounting bracket needed for the Hi Clearance models?
-
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
A/140 Hi Clearance Cultivator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 17241
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: A/140 Hi Clearance Cultivator
Universal mounting frames are different. Rear gang beam bearings (Yes, that is what the brackets are called.) are different. Tool bars are specific but probably interchangeable. A few minor pieces may be different.
-
- 10+ Years
- Posts: 3
- Joined: Sun Oct 12, 2008 5:35 pm
Re: A/140 Hi Clearance Cultivator
Thanks so much for the info, Jim. Thanks to you I didn't buy the regular Cults and waited until now to get the Cultivators for the Hi-C .
FarmerRichard
FarmerRichard
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest