Page 1 of 1

340 International

Posted: Sat Feb 14, 2009 9:30 pm
by LiL' Red
Can someone tell me where the timing marks are on a 340? Need to check timing and don't know if the mark is on the front pulley or the flywheel :oops: C 135 gas engine.

Re: 340 International

Posted: Sat Feb 14, 2009 11:21 pm
by Jim Becker
Pointer next to the crank pulley. Should be visible looking below the governor. Static time at TDC, should check as 25 degrees at 2200 rpm.