All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Mar 20, 2009 9:32 am
Did my international 650 lp come from factory with a torque amplifier? How can i tell??
Fri Mar 20, 2009 10:30 am
Somewhere there is a table with the suffix codes. I thought I had a link to it. It seems to run in my mind that an S following the serial number indicated a TA but that is just a guess on my part. Take a look at the serial number tag and list the letter suffixes following the number. Maybe someone will be able to help.
Sat Mar 28, 2009 11:46 pm
From my manuals, the letter S following the serial # means TA equipped with provisions for live pto.----Letter R means TA equipped with provisions for non-live pto.
You may have other letters in a group on there too.---these all stand for what the tractor left the factory with installed on/in it.
Letters on the engine block serial# tells what the engine had installed in it, (high altitude equipped, exhaust valve rotors, etc) thanks; sonny
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.