All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Sun May 31, 2009 10:49 pm
i bought some nice ih cultivator shanks today
in the lot were some bigger diameter shanks , the shanks look idendical to the other ones
just larger around and longer
what would these be for ?http://s302.photobucket.com/albums/nn83 ... nt=002.jpghttp://s302.photobucket.com/albums/nn83 ... nt=001.jpg
Last edited by ih-cubcadet-man
on Tue Jun 02, 2009 5:01 pm, edited 1 time in total.
Mon Jun 01, 2009 1:22 pm
Pictures might be best.I have some for my cub and some for my H.Same size!!! Kevin Shields are a lot bigger for the H though!!!
Mon Jun 01, 2009 4:35 pm
I would place bets the bigger 1's are for JD
Mon Jun 01, 2009 8:47 pm
they are stamped ih
i will try to get picture tomorrow
Tue Jun 02, 2009 7:44 am
Not pos. but I think that there might be a couple different sizes of IH shanks, and the bigger ones fit the bigger cultivators.(4, 6, 8, row etc.) thanks; sonny
Tue Jun 02, 2009 8:15 pm
All the large shanks i have seen are dear johns, and all the IH shanks are the same I think
Tue Jun 02, 2009 9:24 pm
they are stamped "ih"
Wed Jun 03, 2009 9:51 am
IH made the #16 spring trips with a variety of standards. Round ones were 1 1/4 and 1 7/16 diameter. They were in a variety of lengths, offsets and even a trailing version. Typical Cub cultivators used the small diameter and only two lengths. The larger diameter was used on some larger tractors.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.