4- E Hammer Mill

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

4- E Hammer Mill

Postby Phillip W. Lenke » Mon Oct 19, 2009 11:58 am

Recently acquired a 4-e hammer Mill
Do not have it in possession yet,
But in the mean time I need to get some info.
Do they have interchangeable screens. If so are they still available, I am pretty well versed on grinding I worked at a grain elevator for 3- 1/2 yrs.
What is the belt length and size.
I found a manual on SSB tractors webs site ,does anyone know if this is a good manual?
Thanks
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 4- E Hammer Mill

Postby Mr E » Mon Oct 19, 2009 12:11 pm

No info for you, but I envy you. If you find another, remember me. :lol:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest
February 13 & 14, 2015
User avatar
Mr E
5+ Years
5+ Years
 
Posts: 5383
Joined: Mon Jul 30, 2007 11:48 am
Location: FL, Sneads
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety Award
Circle of Safety: Y

Re: 4- E Hammer Mill

Postby Phillip W. Lenke » Mon Oct 19, 2009 12:20 pm

Yep
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 4- E Hammer Mill

Postby Barnyard » Mon Oct 19, 2009 4:09 pm

Phillip W. Lenke wrote:Do they have interchangeable screens. If so are they still available, I am pretty well versed on grinding I worked at a grain elevator for 3- 1/2 yrs.
What is the belt length and size.
I found a manual on SSB tractors webs site ,does anyone know if this is a good manual?
Thanks
Phil

I talked to Phil a short while ago and gave him a lot of info. I will still answer his questions here in case any one else is looking for one of these or needs info. Btw, they are quite nice to have and I think they are one neat Cub Accessory.

There are several different size screens and each depends on what you want to do with your corn. These are not readily available anywhere. Russ Legget had some made at about $140.00 each. The fab shop I use said he could make them for about $40.00 labor if I found the material. I'm still looking for that.

My belt is eight feet long and four inches wide and cost about $50.00 to make. TSC has every thing needed to do this. Leather belts don't last long with one of these so I used a heavy rubber one.

Phil, as always, it was a pleasure talking to you again. I don't know much about the online manuals. I have one I will try to copy and mail to you.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17872
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: 4- E Hammer Mill

Postby Phillip W. Lenke » Tue Oct 20, 2009 6:03 am

Thanks Bill
Ditto on the Phone conversation,Thanks for all the help. As alway on this forum Guy's are there to help out!
Talk to you soon!
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 4- E Hammer Mill

Postby Taylorcraft1 » Sun Jul 24, 2011 7:55 pm

Hi,

I've been searching the net and stumbled across this thread. I know the 4-E Hammer Mill was used to grind grain, but was it for animal feed only or could it be used for cornmeal and flour for human consumption?

Thanks,
Matt
Taylorcraft1
 
Posts: 1
Joined: Sun Jul 24, 2011 7:50 pm
Zip Code: 37129

Re: 4- E Hammer Mill

Postby Don McCombs » Sun Jul 24, 2011 8:04 pm

Yes. Although it may not grind fine enough for wheat flour. There are several board members who do cornmeal at Cubfests.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10547
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y


Return to Farmall / IH / CASE

Who is online

Users browsing this forum: No registered users and 2 guests