International 340 utility

The "International" House of Cubs

Switch to full style
All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Post a reply
XFARMA
  • XFARMA
  • Posts: 284
  • Joined: Thu Aug 16, 2007 11:13 am
  • Location: NH, Sullivan
  • Zip Code: 03445
  • Tractors Owned: 41 H, 41 M, 44 H, 47 Cub,
    47 BN, 50 SA demo,
    50 C demo,
    54 SC,59 240U,
    Ford, 69 5000, 73 4000,
    73 JD 350B dozer

International 340 utility

Tue Oct 27, 2009 5:52 pm

Just picked up a 340 utility but I can't find the serial # any where and there are 2 brass plates mounted on the tin work under the steering wheel with technical info listed on them. I did find some #'s stamped into the front bolster on the right side but they are hard to read. It has been painted red & white but has yellow paint underneath. Any thoughts or info would be greatly appreciated. Chuck
Jim Becker
  • Jim Becker
  • Posts: 11252
  • Joined: Sun Feb 02, 2003 3:14 pm
  • Location: TX
  • Zip Code: 75048
  • Circle of Safety: Y
  • Website

Re: International 340 utility

Tue Oct 27, 2009 9:49 pm

The serial plate on a 340U should be on the bell housing. Your extra brass plates strongly indicate former military. They should give the branch and some specifics of that unit.
XFARMA
  • XFARMA
  • Posts: 284
  • Joined: Thu Aug 16, 2007 11:13 am
  • Location: NH, Sullivan
  • Zip Code: 03445
  • Tractors Owned: 41 H, 41 M, 44 H, 47 Cub,
    47 BN, 50 SA demo,
    50 C demo,
    54 SC,59 240U,
    Ford, 69 5000, 73 4000,
    73 JD 350B dozer

Re: International 340 utility

Wed Oct 28, 2009 3:03 pm

Thanks Jim, there is no plate on the bellhousing, thats where I thought I would find it, I know the engine has a # but I didn't write it down yet.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

phpBB Mobile / SEO by Artodia.

Board index