All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Sun Dec 20, 2009 9:57 pm
I just picked up some 1-pt. implements from a Farmall 100 including a 2-bottom land plow.
Are these common,or seldom seen?
Thanks for any input.
Mike
Mon Dec 21, 2009 10:08 pm
Ya got any pics of it?---it could be real OR it could be homemade! thanks; sonny
Tue Dec 22, 2009 9:14 am
Mike the two bottom one point is a common plow around NC along with a disc and quite a few other implements they worked good in sandy loom type soil but where i live all we have is red dirt and rocks and they didn't do real well.
Jim
Tue Dec 22, 2009 7:45 pm
Sonny--No pics yet,it doesn't appear to be homemade and handy.
Jim-Thanks, I figured you might know something about it. I'll look for my Farmall 100 brochure and see if it's shown in there.
Mike
Wed Dec 23, 2009 6:09 pm
It's identical (except for dirt and rust)to the plow shown in the original brochure.
Mike
Wed Dec 23, 2009 7:31 pm
Gotta be real, then!!--cool beans!---that would be neat to use, IF your soil was sandy and worked good!( my gumboish stuff dont work well) bout takes 3-plow tractor to pull a 1-bottom plow!
Would look good on the tractor at shows too! thanks; sonny
Thu Dec 24, 2009 7:11 am
I have one that I got from Jim Reid. The SA pulls it in 2nd gear.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.