drawbar fabrication

Mon Jan 18, 2010 8:12 pm

How hard would it be to fabricate this, stock IH, drawbar for one that will bolt up to a Super A?


Image

Re: drawbar fabrication

Mon Jan 18, 2010 8:13 pm

Pics of the of the 274 drawbar that you can view in several sizes

http://www.smugmug.com/gallery/10984879_nuoP3

Re: drawbar fabrication

Mon Jan 18, 2010 8:51 pm

Terry, shouldn't be too hard, but you'd need a machine shop with a big press for those bends....looks like half inch stock.

Re: drawbar fabrication

Mon Jan 18, 2010 10:39 pm

Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that! thanks; sonny

Re: drawbar fabrication

Fri Jan 22, 2010 5:16 pm

Terry, You and Christine need to ride over my way and we can probably fix you up with an original IH Super A drawbar. I will be back home on February 3rd.

Re: drawbar fabrication

Fri Jan 22, 2010 8:52 pm

SONNY wrote:Do a "stack-N-lap" and no machine bending involved, just weld the stacks together !(make sure holes and plates line up before welding) ---Been there done that!


I agree, must easier