Tractor Length

[VAcub]

anybody know the length of a farmall M and a H? wieght of a M with no implem.?

[P B G]

http://www.tractordata.com/farm-tractor ... sions.html

http://www.tractordata.com/farm-tractor ... sions.html

The M is decently complete, the H is missing some stuff, although the wheelbase Plus half the diameter of the tire should get you close to overall length.

[VinceD]

I'll be happy to measure my H for you. From where to where? Front of front wheel to back of rear wheel? What about the drawbar? just let me know.

[VAcub]

outside of tire to outside of tire, Thanks! I'm building a trailer and want to make sure I can at least haul a M if I need to. Thanks for the info P B G! I'm going to save that site!

[VinceD]

Sorry it took so long. I just ran out to the barn and took the measurement: 11'-3". That's from the front of the front tire to the rear of the back tire.

Good luck with the trailer.

[DanR]

Also check the width. My 6x16 would not carry an H without reversing the rear wheels.

[John *.?-!.* cub owner]

On most trailers you can get one on without reversing the wheels by shoving them all the way in, unless you have larger than original size tires. They will rub the sides on a utility type trailer (with sides), though. A car hauler with no sides, or an extra width trailer works well though.

[VAcub]

Thanks for info and measurements

On most trailers you can get one on without reversing the wheels by shoving them all the way in, unless you have larger than original size tires. They will rub the sides on a utility type trailer (with sides), though. A car hauler with no sides, or an extra width trailer works well though.

You sure can get one on a trailer!

[DanR]

Fine looking H. I think the clipped wheels may have something to do with the width.