Farmall Cub

Posted: **Tue Jul 20, 2010 9:01 pm**

I have a #8 or Little Genius (not sure of the difference) and I need to find a source for the wires that connect to the wheel depth levers. I would think that any heavy gauge solid wire would work but not sure where to start looking. Any ideas?

Posted: **Tue Jul 20, 2010 10:38 pm**

We always just made them out of fence brace wire.---its heavy and hard so once its shaped it stays! thanks; sonny

Posted: **Wed Jul 21, 2010 6:55 pm**

Good ol' #9 wire should do the job.

Posted: **Thu Jul 22, 2010 11:20 am**

I need a couple of handles,don't go to IH though.They are $$$$$$$$$ big time.Kevin :shock:

Posted: **Thu Jul 22, 2010 12:19 pm**

Number 9 guage wire

Farmall Cub

part (wire) for #8 plow

part (wire) for #8 plow

Re: part (wire) for #8 plow

Re: part (wire) for #8 plow

Re: part (wire) for #8 plow

Re: part (wire) for #8 plow