All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Thu Jul 29, 2010 4:13 pm
i need help in the id of a 1 bottom plow for an a it is not a a-91 it does have 1 spring from the front of the beam to the front does anyone have pics of a a-92 or a-191 jim becker can you help thanks
Thu Jul 29, 2010 5:52 pm
I might be able to help if you can post a picture of what you have.
Fri Jul 30, 2010 5:21 pm
at this time i can't post pics i have the a-91 manual and it is not that one and i'm missing some parts could you please send me pics of the a-92 and maybe 1 or 2 others there is 1 spring on the front of the beam and a v with the 2 arms hooking to the front 1 lever bolting to the right front pad hope this helps thanks jim
Fri Jul 30, 2010 6:43 pm
If you have some pics, email them to me and I will post em
Fri Jul 30, 2010 8:10 pm
Fri Jul 30, 2010 9:01 pm
I do not have a pic of one Tom if I did I would post it for you maybe some one will post one before long
Fri Jul 30, 2010 9:05 pm
thanks to all who can help
Fri Jul 30, 2010 9:10 pm
I don't have pictures of the possibilities either. I'd have to try to find something in a manual. If I did, then I'd have to scan it. The pictures I have don't really show the differences. The A-192 evidently came with the spring. I don't know if any came on the A-92 but there was a package to backfit the spring onto both the A-91 and A-92. The tilt on the rear rockshaft of the A-91 requires a wrench. The other two had a crank adjust.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.