This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

3 point hitch

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
mth74
10+ Years
10+ Years
Posts: 273
Joined: Sun Aug 12, 2007 5:21 pm
Zip Code: 00000
Location: OH,

3 point hitch

Postby mth74 » Sun Aug 01, 2010 5:23 pm

On a 3 point hitch I have on one of the arms the ball were you hook up to a implement its missing can the ball be replaced or does the whole arm have to be replaced.


thanks
Thank you

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Virginia Mike
10+ Years
10+ Years
Posts: 1300
Joined: Tue Nov 23, 2004 7:21 pm
Zip Code: 24095
Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine
Location: Stewartsville, Virginia

Re: 3 point hitch

Postby Virginia Mike » Sun Aug 01, 2010 6:06 pm

Replace the ball, weld a small bead around the opening, and peen it in to hold the ball. I think Shoup has the balls.
Best,
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: 3 point hitch

Postby Bus Driver » Sun Aug 01, 2010 6:41 pm

Often implement dealers have stub arm ends about 3-4 inches long with the ball. The stub is welded to the existing arm after cutting the old end off.
Not near you , but available here.
http://orders.leinbachs.com/cart/machinery/
Luck favors those who are prepared

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 5616
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: 3 point hitch

Postby Gary Dotson » Mon Aug 02, 2010 6:32 am

You can also get just the round portion, with the ball in it to weld to your old arm. Don't know if they still do, but TSC had both styles a while back.

DanR
10+ Years
10+ Years
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Zip Code: 37743
Circle of Safety: Y
Location: Tennessee East

Re: 3 point hitch

Postby DanR » Fri Aug 06, 2010 5:44 am

Just cut a piece out of the end of the loop, heat and bend the two together and weld it shut. Usually no need to replace the ball.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: 3 point hitch

Postby John *.?-!.* cub owner » Fri Aug 06, 2010 8:05 am

DanR wrote:Just cut a piece out of the end of the loop, heat and bend the two together and weld it shut. Usually no need to replace the ball.
That works if one is coming out, but I believe his is missing.
If you are not part of the solution,
you are part of the problem!!!

DanR
10+ Years
10+ Years
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Zip Code: 37743
Circle of Safety: Y
Location: Tennessee East

Re: 3 point hitch

Postby DanR » Fri Aug 06, 2010 12:29 pm

TSC has the ball only.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 3 guests