All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Mon Sep 27, 2010 11:10 pm
I'm getting a bit concerned about the condition of my Case springs. I dont want one snapping and taking an eye out of the kids or myself!
I would like to replace my 1948 Case 'VAI' sickle mover attachment springs. Are these readily available??
Thanks for any advice! http://i537.photobucket.com/albums/ff34 ... Mc7C6-.jpg
Tue Sep 28, 2010 9:35 am
Just thinking. Have you tried the Case/IH & New Holland dealerships? You probably have.
If you can get the spring(s) off, intact. Take them to an industrial supply machine shop and/or to your nearest tractor dealership. They should be able to match them up.
Tue Sep 28, 2010 10:36 am
I had some obsolete garage door springs custom made at prices that did fit the budget. Search online if the dealer does not have them. For safety, a 3/16 cable can be run through the spring with enough slack to accommodate maximum extension. Cable clamps at each end complete the installation.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.