Switch to full style
All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Free Manifold - LAST CHANCE

Mon Jun 27, 2011 6:53 pm

Anyone want a free manifold for a Farmall A, Super A, C or Super C? It has two 3/16 inch holes rusted through in the exhaust portion. I think it can probably be repaired and be made usable. I'm not sure about the condition of the threads. Right now it has a copper pipe adapter in there. I'll bring it to the Tug if someone expresses an interest beforehand. Otherwise, it goes on the scrap pile. :D
Last edited by Don McCombs on Sat Jul 09, 2011 7:14 pm, edited 1 time in total.

Re: Free Manifold

Tue Jun 28, 2011 3:25 pm

Where are the holes? There are supposed to be two small holes in the lower corners for any moisture to drain out.

Re: Free Manifold

Tue Jun 28, 2011 7:43 pm

They're on the upper side. Definitely rust holes. But, I'm sure they could be welded.

Re: Free Manifold - LAST CHANCE

Sat Jul 09, 2011 7:15 pm

Goes to the scrap pile on Monday, if I don't hear anything.

Re: Free Manifold - LAST CHANCE

Sat Jul 09, 2011 11:52 pm

I would like it and i will be at the tug with dale shaw

Re: Free Manifold - LAST CHANCE

Sun Jul 10, 2011 6:54 am

OK, Josh. I will bring it with me. Thanks.
Post a reply