Page 1 of 1
Free Manifold - LAST CHANCE
Posted: Mon Jun 27, 2011 6:53 pm
by Don McCombs
Anyone want a free manifold for a Farmall A, Super A, C or Super C? It has two 3/16 inch holes rusted through in the exhaust portion. I think it can probably be repaired and be made usable. I'm not sure about the condition of the threads. Right now it has a copper pipe adapter in there. I'll bring it to the Tug if someone expresses an interest beforehand. Otherwise, it goes on the scrap pile.
Re: Free Manifold
Posted: Tue Jun 28, 2011 3:25 pm
by Daniel H.
Where are the holes? There are supposed to be two small holes in the lower corners for any moisture to drain out.
Re: Free Manifold
Posted: Tue Jun 28, 2011 7:43 pm
by Don McCombs
They're on the upper side. Definitely rust holes. But, I'm sure they could be welded.
Re: Free Manifold - LAST CHANCE
Posted: Sat Jul 09, 2011 7:15 pm
by Don McCombs
Goes to the scrap pile on Monday, if I don't hear anything.
Re: Free Manifold - LAST CHANCE
Posted: Sat Jul 09, 2011 11:52 pm
by Josh Blair
I would like it and i will be at the tug with dale shaw
Re: Free Manifold - LAST CHANCE
Posted: Sun Jul 10, 2011 6:54 am
by Don McCombs
OK, Josh. I will bring it with me. Thanks.