All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Moderator: Team Cub
by cjpenny89 » Thu Jul 14, 2011 7:54 pm
I have an IH-1000 loader on my Farmall 100 and it has only been on there since spring. It worked good up to a week or so ago. It was not lifting well or pushing the the front bucket up and forward. I checked the hydraulic fluid and it seemed low so I put some in it today and it seemed to help but now the return line is pulsating the whole time unless you are lifting or tilting the bucket. It makes a pulsating sound at the tractor also and you can see the hose bouncing. do I have air in the system or is there another problem? any help or suggestions would be great. thanks Chad
"don't find fault, find a remedy" 1948 Cub, 1945 A, 1955 100
-

cjpenny89
- 501 Club

-
- Posts: 1055
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
by Rudi » Thu Jul 14, 2011 9:29 pm
Chad:
Although I have no experience with a loader yet, I have unfortunately been learning hydraulics the hard way. It kinda sounds like you have air in the system. Try bleeding the system and check the level again. You may have to do it a few times to get the air out.
Let us know what happens.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship  "Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie Cub Manual Server
-

Rudi
- Team Cub

-
- Posts: 27192
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae" 1951 Cub "Jethro" Dad's Putt-Putt IH 129 CC

- Circle of Safety: Y
-
Return to Farmall / IH / CASE
Who is online
Users browsing this forum: No registered users and 1 guest
|
|