All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Sep 02, 2011 6:28 am
On my fully mounted (no dolly wheels)Sickle Bar Mower the oak 'pitman arm' is home made and is the wrong size and won't work. I can check to see if there is a model # anywhere on the mower.
Does anyone have a good one or can you get a NOS one.
It has 4 bolt holes on both ends and looks like a standard item.
Any help would be much appreciated.
Fri Sep 02, 2011 5:14 pm
Case IH is really great.
My IH dealer has a new pitman arm on the way from Indiana. Will be here Tuesday for $22.00. These fellows had the old books and were able to ID the model number of my mower using a couple of part references I provided.
Fri Sep 02, 2011 6:51 pm
You're lucky. Not all CaseIH parts guys are that helpful.
Last edited by Don McCombs
on Fri Sep 02, 2011 9:01 pm, edited 1 time in total.
Fri Sep 02, 2011 9:00 pm
It is cruel to ask a question about something and not post a picture.
Fri Sep 02, 2011 10:03 pm
Fri Sep 09, 2011 10:08 pm
The right part ( IH pitman arm) really makes the job tons easier.
The guys at the IH dealership kinda laughed at this little 3ft Wooden piece, as I carried it out the door.
They were obviously thinking of other more complex parts they handle on a daily basis, as they glanced at this outdated wooden stick.
As simple as this arm looks this is quite a complicated little piece.
The guy that designed the first one was a real engineer and the guy that tried to copy it before I bought the new one home had no understanding of how it worked.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.