Used the 1000 Loader Today!!!

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Used the 1000 Loader Today!!!

Postby BigMatt » Sun Jan 22, 2012 8:36 pm

I bought some stuff at the auction yesterday and unloaded the trailer today! The loader worked. It was a little light on capacity, but I was able to rotate the bucket to get the bush hog up.

I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.

What do you guys think?

Image
BigMatt
501 Club
501 Club
 
Posts: 524
Joined: Sat Jul 17, 2010 10:41 am
Location: New Castle, IN
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby Steve Butram » Sun Jan 22, 2012 9:54 pm

there is a presure relief on the loader valve you may want to adjust to get some add lifting power.
Co- hosting Central Indiana Cub Fest near Tipton Indiana September of 2014
User avatar
Steve Butram
Cub Pro
Cub Pro
 
Posts: 1917
Joined: Mon Feb 17, 2003 7:53 am
Location: IN West Lafayette
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
1948
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Mon Jan 23, 2012 6:42 am

OK, I will look through the operator's manual today.
BigMatt
501 Club
501 Club
 
Posts: 524
Joined: Sat Jul 17, 2010 10:41 am
Location: New Castle, IN
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby Steve Butram » Mon Jan 23, 2012 7:35 am

It will be under the Acorn Nut on the left side of the valve.
Co- hosting Central Indiana Cub Fest near Tipton Indiana September of 2014
User avatar
Steve Butram
Cub Pro
Cub Pro
 
Posts: 1917
Joined: Mon Feb 17, 2003 7:53 am
Location: IN West Lafayette
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
1948
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Wed Jan 25, 2012 8:21 am

do you have a fast hitch brush hog on that tractor? 4' or 5'? I want to get one for mine or make one!
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
User avatar
cjpenny89
10+ Years
10+ Years
 
Posts: 1069
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Wed Jan 25, 2012 8:52 am

I have 2 fast hitch bush hogs. I am looking to sell one of them.

PM sent...
BigMatt
501 Club
501 Club
 
Posts: 524
Joined: Sat Jul 17, 2010 10:41 am
Location: New Castle, IN
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Wed Jan 25, 2012 3:10 pm

pm sent back I think I will take it
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
User avatar
cjpenny89
10+ Years
10+ Years
 
Posts: 1069
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Wed Jan 25, 2012 6:28 pm

OK, I went out and adjusted the pressure relief today after work. It is running really well now. I adjusted it so that it would just pick up the bush hog without bypassing at all. I don't have a 1500 PSI gauge. I also ran both rams against a stop and the hoses held, so the relief is still doing it's job.

Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.
BigMatt
501 Club
501 Club
 
Posts: 524
Joined: Sat Jul 17, 2010 10:41 am
Location: New Castle, IN
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety Award
Circle of Safety: Y

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Thu Jan 26, 2012 7:31 am

I may have a gauge for you!
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
User avatar
cjpenny89
10+ Years
10+ Years
 
Posts: 1069
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655


Return to Farmall / IH / CASE

Who is online

Users browsing this forum: No registered users and 0 guests