Switch to full style
All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Disc ID

Sun Mar 24, 2013 5:09 pm

I had a gentleman respond to an ad I placed about any Farmall implements for sale and he has several. One is a disc I'm not familiar with, but interested in. He said it is a pull type, single gang. Here is the interesting part. He said you set your angle, reverse to set gang to zero to turn, travel, or whatever, pull a rope and the gang automatically resets to cutting angle. Cut that row, reverse to set at zero again, travel, pull rope again to cut. I've seen a lot of old double & single gang discs around here, but none that had this feature, or none that I noticed. Could be common elsewhere. Sorry, no pics yet. Any help appreciated.

Re: Disc ID

Sun Mar 24, 2013 5:20 pm

that is common on older disc here

Re: Disc ID

Sun Mar 24, 2013 5:21 pm

but it may be the front half od a double disc

Re: Disc ID

Sun Mar 24, 2013 5:25 pm

I had a double gang disc like that years ago that I pulled with my M. Pull the rope, back up, and the blades are straight. Pull the rope, go foreward and set your angle. It worked real well.


Tom

Re: Disc ID

Sun Mar 24, 2013 6:10 pm

That is how the cub 23A disc works. They work good, but do work best with the 2nd gang behind it. i have a double gang, and the front half of a single gang. Whichever I choose to pull, I add 2 rear wheel weights for an additional 300lb. Cub pulls it good unless the soil is too wet.

Re: Disc ID

Sun Mar 24, 2013 8:58 pm

Have an 8' tandem disc that works that way -Use my B to pull it - not sure the Cub would handle it fully angled in plowed ground. Does a good job of working the soil tho. Dusty B

Re: Disc ID

Mon Mar 25, 2013 10:49 am

What would one in good useable condition such as I described be worth?

Re: Disc ID

Mon Mar 25, 2013 4:27 pm

Just the front half $150 to $200

Complete in good shape $350-$500

Re: Disc ID

Mon Mar 25, 2013 10:53 pm

Lots of speculation could be avoided ifn we had pics on which to base an opinion. Is that possible?

Re: Disc ID

Tue Mar 26, 2013 3:45 pm

I don't have any and don't know if he can send any. I'll try.

Re: Disc ID

Wed Mar 27, 2013 12:25 am

Intersteing, I just put a ID question the other day for a large internation disk. I pulled the pins and am using the front gangs only with my cub. And theat adjustment is a great think. I bought the whole disk with 4 gangs for a hundred. The front half alone works great on my cub.

dd_010.jpg
dd_010.jpg (95.41 KiB) Viewed 532 times

Re: Disc ID

Wed Mar 27, 2013 8:05 am

I have and use one exactly like the one pictured. Only problem is the center of the gang does not cut as deep as the ends.

Re: Disc ID

Wed Mar 27, 2013 11:18 am

ID about whut?????????? :? :? :?

Re: Disc ID

Wed Mar 27, 2013 12:55 pm

Hi all - I've also got this disc. I'm traveling on business in NJ right now. I'm pretty sure the tags are still on ours. When I get back late tomorrow night I'll be at the farm on Friday - I'll get a shot of the disc and the ID tag. Hope that helps, Ken

Re: Disc ID

Thu May 30, 2013 2:10 pm

I have one too and I believe it is an IHC #9a disk harrow.

I bought it from the same guy who sold my the M. I got it for $150.

I pull it with 4-100# weights on it with the M and it does a great job.
Post a reply