This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

ih c-3

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
jiminSC
5+ Years
5+ Years
Posts: 2
Joined: Wed Sep 03, 2014 4:53 pm
Zip Code: 29902

ih c-3

Postby jiminSC » Wed Sep 03, 2014 5:00 pm

hello fellas,
first time on here, so be patient.
not much of a mechanic, throwing that out there first.

have a lowboy 154 my wife got in fathers estate.
has the case c3 mower.

cut 4 strips in pasture, and blade and a housing (that blade is bolted to) fell off. spindle shaft still goes from pully, down thru deck.
seems bearing is still on?
is this housing hydrocially pressed onto the shaft, was ther a pin or key?
need whole thing rebuilt?

looked for some diagrams but havent found one yet.
any help and or suggestions would be helpful. thanks again

SPONSOR AD

Sponsor



Sponsor
 

tst
10+ Years
10+ Years
Posts: 5184
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: ih c-3

Postby tst » Wed Sep 03, 2014 9:00 pm

I believe that mower is a 3160 deck, very similar to a C3, probably uses the same spindle, you need a new spindle shaft

Scrivet
10+ Years
10+ Years
Posts: 2929
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: ih c-3

Postby Scrivet » Wed Sep 03, 2014 9:48 pm

If I understand the hub that the mower blade bolts to came off the shaft?
I have a 3160 deck but I haven't used it recently and don't remember how the hub mounts to the shaft. I do remember that the Danco 2860(right # ?) spindle (used on both the 3160 and C-3) takes a very common trailer wheel bearing if you have to do a rebuild.

jiminSC
5+ Years
5+ Years
Posts: 2
Joined: Wed Sep 03, 2014 4:53 pm
Zip Code: 29902

Re: ih c-3

Postby jiminSC » Wed Sep 03, 2014 10:07 pm

Thanks for the info. I've been looking for diagram to see how it assymbles. Great idea on trailer bearings if they same size.

User avatar
randallc
Cub Pro
Cub Pro
Posts: 1906
Joined: Tue Jan 18, 2011 9:16 am
Zip Code: 72940
Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub
Circle of Safety: Y
Location: Huntington, AR

Re: ih c-3

Postby randallc » Thu Sep 04, 2014 4:51 am

And, welcome to the forum from Arkansas.
Guinea, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub, 61 Cub, Scrapy, and 48 Cub Al, 48 cub, Billy D.
Image


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 2 guests