Wheel weight questionModerator: Team Cub
9 posts
• Page 1 of 1
Wheel weight questionAre the front weights the same on the A B C H and M. I have been told that but it doesn't seem right.
Last edited by WJ on Sun Jul 31, 2005 11:31 pm, edited 1 time in total.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.
Same weights on the rear of a cub cadet too.
Bill Bill
"Life's tough.It's even tougher if you're stupid." - John Wayne " We hang petty thieves and appoint the great ones to public office." - Aesop
I think that the cub and the cub cadet are the only ones that are the same. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.
Yep, that is correct. The front wheel weights on the cubs are the same ones used on the rear of the cadets.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"
Greg Norman
How about IH 140? Does the wheel weights for A fit a 140?
Little Red would like to know. Thanks Si hoc legere scis,nimium eruditionis habes.
The front Cub and rear Cadet weights are the same, but different from the other tractors. The weight on the front of the A B C H and M is the same but different from the Cub weight (heavier and 3 bolts). This weight fits through the 130 but I don't think it fits the 140. The 140 has a disk wheel and probably needs a 4 bolt weight.
9 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 1 guest |
|