This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
looking for help getting ignition parts for a 354
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
looking for help getting ignition parts for a 354
My brother inlaw has a 1974 Brittish manufactured IH 354 with a gas engine. As far as I know these were made in Great Britten and shipped to the states and assembled here. I could be wrong on this but I cant find much info on them. We are trying to replace the points and cant seem to locate a replacement set. Has or dose any one know were we can locate these. Thanks for any help on this. Tractor is setting in the field until fixed.
Pete from Virginia Beach
- SONNY
- 10+ Years
- Posts: 4086
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: looking for help getting ignition parts for a 354
Pete!! --from what I can find, it looks like the IH 154 engine.---they also had a diesel version!---Try IH dealer or auto parts store and see if they can come up with some ignition parts,---also you will need to see if you have DELCO or AUTO-LITE dist!---I think they use different hardware in them The 504 used a 154 engine in it , so that might cross to your engine too! thanks; sonny
-
- 10+ Years
- Posts: 4945
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: looking for help getting ignition parts for a 354
The C153 in a 504 is completely different from the BC144 engine used in the 354.
If you have the British Delco distributor, apparently the ignition parts for a Ferguson TO-20 are a match:
http://www.yesterdaystractors.com/cgi-b ... &th=493118
If you have the British Delco distributor, apparently the ignition parts for a Ferguson TO-20 are a match:
http://www.yesterdaystractors.com/cgi-b ... &th=493118
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: looking for help getting ignition parts for a 354
here is an up date. the distributor was a delco and we did find the right points and condensor for it. do apreciate the help its tough to find info on this tractor. it would be sitting on the edge of a field if not for the computer age.
Pete from Virginia Beach
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 2 guests