Switch to full style
Farmall H, HV & Super H, 1939-1954

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Rod Knock

Thu Oct 20, 2005 4:47 pm

I'm solicting ideas for an engine noise I'm having with the H. There is a loud tick that appears to come from the #4 cylinder. I pulled the plug wire while it was running and it becomes a loud knock. Pulling other cylinder wires changes nothing. Checked valve rockers and they all good as is the lash. No noise is coming from the valves with the cover off either.
Most of what I know about true rod knock is its worse with increasing RPM and load. This worsens with decreasing RPM and load.
Other than this noise all engine parameters are normal and it runs nicely.

Fire away!! :lol:

Thu Oct 20, 2005 6:18 pm

I would suggest using pump gas :lol: :lol: :lol:

Seriously, it sounds like a rod bearing to me.
8)

Thu Oct 20, 2005 9:24 pm

Was raised on Hs, and I agree with donny, sounds like a rod beairng to me.

Fri Oct 21, 2005 6:17 am

I would take it down and check. Continuing to run it may score up the crankshaft if it is not already so.

Bill
Post a reply